The TI45 f/4 was finally tested with full success at Mr. Calcinaio Observatory – Radicofani (SI) Italy From Left: Prof. Emanuele Pace (scientific manager of the project), Eng. Antonino Previti (Telescopi Italiani), Eng. Leonardo Priami (Telescopi Italiani), Claudio Dandolo (Telescopi Italiani)
New molds for TI35 allow to stay within 0,02 mm of tolerance!!
Another TI45 f/4 is leaving our company. It will be installed soon under Namibia sky. From
New molds for TI35 carbon parts are ready!!
A SEA during the measurement of a convex spherical mirror within 1 micron of precision
M106 field. A very good raw test on a TI45 f/4. Single 90 sec, unguided, uncalibrated frame, taken with a KAF16803 (37 x 37 mm CCD sensor). Sky was medium-bad (SQM about 20.1, Poor seeing about FWHM 2,6″).
Holding a 362 mm diameter quartz blank in your hand and having the impression that it is made of plastic … it’s fantastic – Fused Silica (Quartz) performs an awesome thermal expansion coefficient of 5.4 x 10-7/℃ , 6 time less than borosilicate glasses, harder enough to allow better figuring process and advantage in terms of […]
The first big lightweight mirror, 562 mm diameter, f/2.9. An awesome piece to handle.
Fused Silica (Quartz) performs an awesome thermal expansion coefficient of 5.4 x 10-7/℃ , 6 time less than borosilicate glasses, harder enough to allow better figuring process and advantage in terms of strength to density ratio.
First test of the Astrograph Control Software using a smartphone via WIFI. For more informations on our Astrographs, please visit our website: www.italiantelescopes.net The Control Software is full Ascom Alpaca compliant.
Un po’ di ritardo rispetto alle previsioni, ma ne varrà la pena. La presentazione dell’astrografo TI45 è prevista per la primavera 2016 e ci saranno sorprese molto interessanti (rispetto alle caratteristiche che trovate attualmente sul sito) che sicuramente giustificheranno l’attesa. Ancora un po’ di pazienza…
Most of the mechanical parts of our TI45 Astrograph are in phase of realization thanks to the hard work of various CNC machines. Great design, all 3D designed and FEM optimized, all CNC made, for the higher grade Astrograph in the market.
Indeed there was something missing! Now a beautiful inscription on the metal tells us what we are talking about. We are a bit ‘late, but here we come! We do not call them “correctors”! They are simply the “lens groups” that are part of the optical design. So… “Triplet ED Lens Group”. They are for […]
